المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : فلاشة doogee_x11


admin
07-24-2019, 17:09
فلاشة doogee_x11
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط] ([فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط])
صورة من الهاتف
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط] ([فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط])
Info

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) KSI 0x454838454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838454538 : 00000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM142)
Build ID: O11019
Display ID: O11019
Version: 8.1.0
Build Date: Tue Sep 18 14:45:49 CST 2018
Model: X11
Brand: DOOGEE
Device: X11
Manufacturer: DOOGEE
This phone have FRP partition.
IMEI[1]: 000000000000000
IMEI[2]: 000000000000000
Wait untill phone will start charging.
[0]All done.

قرائة الفلاشة

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) KSI 0x454838454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838454538 : 00000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM142)
Build ID: O11019
Display ID: O11019
Version: 8.1.0
Build Date: Tue Sep 18 14:45:49 CST 2018
Model: X11
Brand: DOOGEE
Device: X11
Manufacturer: DOOGEE
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 000000000000000
IMEI[2] from NVRAM: 000000000000000
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing odmdtbo
Reading: BEGIN: 0x4600000 - LEN: 0x1000000
Start processing vendor
Reading: BEGIN: 0x6000000 - LEN: 0x12c00000
Start processing frp ......
Reading: BEGIN: 0x18c00000 - LEN: 0x100000
Start processing trustzone
Start processing nvdata ......
Reading: BEGIN: 0x19700000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x1da00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0x1e800000 - LEN: 0x57800000
Start processing sdrpmb ......
Reading: BEGIN: 0x1c5780000 - LEN: 0x1800000
Saved to : C:\Users\Documents\Android_MTK\firmware_backup\MT6 580_EMMC_DOOGEE_X11_8_1_0_2019_04_07_16_07)
Wait untill phone will start charging.
[0]All done.
رابط التحميل ([فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط])